Location:Home > Product > T bolt > Toothed T bolt

Toothed T bolt

Installation of T bolt with Cast in Channels.

The heads of the bolts are inserted into the channel slot, after a turn to the right by 90° must rest fully on both lengs of teh cast in channel and must be locked by tightening the nut with the torque spanner. 


Surface Treatment: Galvanized / HDG / Dacromet /  Staineless Steel 


Steel grade: 4.6 / 8.8

Product introduction


According to the head of T bolt shape, T bolt can be devided into two type: Hammer head bolt and Hook head bolt. 

Hammer head T bolt mainly used for T2 and T3 type, Anchor channel GTA28/15 and GTA38/17.   

Hook head bolt are mainly used for T4 and T5, the other type the other type of anchor channels.

Hammer Head


Hook Head



T-Bolt International Related industry Standards:

Standard grade T-bolts ASTM F568 Grade 4.6

High tensile T-bolts ASTM F568 Grade 8.8

Restraint straps ASTM A572 Grade 50

HDG (Hot dip galvanizing) ASTM A153

EP (Zinc electroplating) ASTM B633




Keywords:

T bolt , T head bolt ,T hammer head bolt , anchor channel T bolt , cast in channel T bolt ,  channel T bolt 











Product inquiry

Related products

Leave a Message