Installation of T bolt with Cast in Channels.
The heads of the bolts are inserted into the channel slot, after a turn to the right by 90° must rest fully on both lengs of teh cast in channel and must be locked by tightening the nut with the torque spanner.
Surface Treatment: Galvanized / HDG / Dacromet / Staineless Steel
Steel grade: 4.6 / 8.8
Product introduction
According to the head of T bolt shape, T bolt can be devided into two type: Hammer head bolt and Hook head bolt.
Hammer head T bolt mainly used for T2 and T3 type, Anchor channel GTA28/15 and GTA38/17.
Hook head bolt are mainly used for T4 and T5, the other type the other type of anchor channels.
Hammer Head
Hook Head
T-Bolt International Related industry Standards:
Standard grade T-bolts ASTM F568 Grade 4.6
High tensile T-bolts ASTM F568 Grade 8.8
Restraint straps ASTM A572 Grade 50
HDG (Hot dip galvanizing) ASTM A153
EP (Zinc electroplating) ASTM B633
Keywords:
Prev：暂无上一篇
Product inquiry
Related products
